850 Grain Cart














STANDARD FEATURES
- 1 ¾ - 1000 RPM PTO
- Protect auger driver and tractor PTO with the automatic reset “cut-out” clutch with overrunning clutch
- Adjustable austempered cast hitch, fits category 4 or 5 hammer strap tractor drawbar
- High visibility - reflective decals
- LED Tail, flasher/turn signal lights and auger spotlight for nighttime operation
- Tube and truss design
- Welded box construction with silicone sealed seams resists rust and corrosion
- Heavy duty spindles and hubs
AUGER
- 20” diameter balanced auger with 3/8” flighting and Posi-Drive connection
- UltraFlyte made with 1008/1010 high carbon steel including a thicker outer edge, resulting in up to 50% longer wear and faster conveying
- Forward reach auger for optimum operator visibility
- 2 stage unload auger folding cylinder
OPTIONS
-
Roll top tarp
Hydraulic Drive Kit - High Speed/Torque
Scale kits
Ergonomic pendant control
- Camoplast Trailed Track System 70 Series - Reduces ground pressure by 30-80% versus tires, reduces the number of contact points, increases mobility and field access especially in softer footing conditions, and maximizes the performance potential of the large capacity carts.
NOTE: Demco grain carts are not to be towed down the road loaded
NOTES ON HYDRAULICS: A standard grain cart requires two hydraulic remotes. The optional adjustable spout requires an additional hydraulic remote. Additional 15 - 25 GPM oil flow is required for hydraulic unloading drive.
850 Grain Cart Specifications | |
---|---|
Capacity | 850 Bu. |
Balanced Auger Size | 20" |
Unloading Time (bu/min.) | 530 |
Spindle Size | 4 1/2" |
Tractor HP Required | 175+ |
Hub Size | 10 bolt |
Tread Width (stand.) | 120" |
Tread Width (opt.) | 120-144" |
Tongue Frame | 4"x10" |
Tongue Weight (empty) | 1,180 lbs. |
Tongue Weight (loaded) | 4,000 lbs. |
Weight/Wheels & Tires | 11,400 lbs. |
Weight/Tracks | 17,600 lbs. |
* Bushel capacity measured with #2 corn at 15% moisture content (56 lb. test weight)
A Auger extends to side | 9'5" |
B Box width (transport) | w/24.5s: 12'4" |
w/30.5s: 12'10" | |
w/900s: 13'4" | |
C Height, low side | 11' |
D Ground clearance | 15" |
E Auger extends to front | 5'8" |
F Box length | 20'1" |
G Box height (high side) | 21'8" |
H Total length | 26'8" |
I Axle to tongue length | 16'1" |
J Drawbar/tongue height | 20" |
K Auger clearance height | 13'9" |


Title | Date | Version |
---|---|---|
AG20053 - Grain Cart - Single Auger 1000SA & 1100SA Parts Manual | November 17, 2022 | Rev. 3 |
AG20036 - 850, 1050 & 1150 Grain Cart Operators Manual | December 8, 2020 | rev.20 |
AG20037 Posi-Drive Installation Instructions | May 25, 2023 | Rev 0 |
CPB 515 | May 25, 2023 | Rev 0 |
HYD CYL INSTALL ON GC 11 21 2012 | May 25, 2023 | Rev 0 |
CPB 513 Parts Manual TTS 70 80 100 110 Series EN | November 21, 2022 | Rev1 |
CPB 515 Operation and Maintenance Manual OMM TTS 70 80 100 110 Series | November 21, 2022 |
Title | Date | Version |
---|---|---|
AG11008 Harvest Brochure | May 25, 2023 | |
Grain Cart Weighing | May 25, 2023 | Rev 13 |
Trailed Track System1 | May 25, 2023 | Rev 0 |
Track System powerpoint | May 25, 2023 | Rev 0 |