1272 Grain Carts

Forward Reach — Unmatched forward reach for full visibility while unloading

Grain Cart Clean-out — The slope of gravity flow carts allows for fast clean-out

Adjustable Austempered Cast Hitch fits category 4 or 5 hammerstrap tractor drawbar

Posi Drive Coupler eliminates noise and shock when engaging

Pendant Grip — Optional ergonomic pendant grip operates grain flow gate, auger fold, and adjustable spount

UltraFlyte flighting for less wear and faster conveying

1000 RPM PTO.
Hydraulic drive (35 GPM minimum oil flow required).
Automatic reset “cut-out” clutch with overrunning clutch to protect auger drive and tractor PTO
20" diameter balanced auger with 3/8" flighting and Posi-Lock connection.
UltraFlyte made with 1008/1010 high carbon steel including a thicker outer edge, resulting in up to 50% longer wear and faster conveying.
Auger positioned for operator visibility.
Auger folds within the width of the box for compact transporting and storage.
Grain viewing windows.
Welded box construction with silicone sealed seams resists rust and corrosion.
7000 lb. drop-leg tongue jack with separate storage position provides tighter turning radius.
Hand wheel operated clean-out door at bottom of auger for easy post season cleanup.
LED Tail, flasher/turn signal lights and auger spotlight for nighttime operation.
Transport width with single wheels: 12'
Transport safety chain
Adjustable auger spout
Transport safety chain
Adjustable auger spout
Camoplast Trailed Track System - Reduces ground pressure by 30-80% versus tires, reduces the number of contact points, increases mobility and field access especially in softer footing conditions, and maximizes the performance potential of the large capacity carts

OPTIONS

Roll top tarp
Ergonomic pendant control
Standard wireless auto weighing system

NOTES ON HYDRAULICS: A standard grain cart requires two hydraulic remotes. The optional adjustable spout requires an additional hydraulic remote. Additional 35 - 40 GPM oil flow is required for hydraulic unloading drive. 70 GPM max oil flow is required for high speed high torque hydraulic unloading drive.

1102 Grain Cart Specifications
Capacity	1270+ Bu.
Balanced Auger Size	20"
Unloading Time (bu/min.)	530
Spindle Size	D=4 1/2" S=5 1/2"
Tractor HP Required	200+
Hub Size	10 bolt - 13.19"
Tread Width (stand.)	112"
Tread Width (opt.)	NA
Tongue Frame	4"x10"
Tongue Weight (empty)	1,750 lbs.
Tongue Weight (loaded)	6,000 lbs.
Weight/Wheels & Tires	20,500 lbs.
Weight/Tracks	25,320 lbs.

* Bushel capacity measured with #2 corn at 15% moisture content (56 lb. test weight)

* 1102/1272 track units will increase the carts capacity 20 to 30 bushels

A Auger extends to side	9'7"
B Box width (transport)	14'5"
C Height, low side	11'3"
D Ground clearance	16"
E Auger extends to front	4'4"
F Box length	24'3"
G Box height (high side)	12'5"
H Total length	30'10"
I Axle to tongue length	19'2"
J Drawbar/tongue height	20"
K Auger clearance height	13'9"