|
|
|
|
 |
Use the following links or scroll the page.
Last
Updated: October
3, 2007
|
|
|
|
|
Return To Ag Page |
|
|
|
|
|
| |
| RM SERIES
150 & 200 GALLON REAR MOUNT UNITS |
|
|
|
|
- 150 or 200 gallon tank with jet agitation, molded sight gauge,
sump and fillwell with no-splash cover.
- Rear mount brackets are complete with saddles, tank bands and
all necessary bolts.
- Rear mount brackets will fit category "1" and "2".
- Unit may be used with a "Quick Attach" three point hook-up.
- Non-retractable built-in ground stand for storage when empty.
- Hypro 8 roller PTO pump (C7560D) will deliver 22 GPM at 1000 RPM,
12 GPM at 540 RPM and 300 PSI max.
- 21', 28', 30', and 40' Truss-T booms feature vertical and horizontal
boom breakaway with 20" nozzle spacing.
See
Boom Features
NOTE: Rear mount is unassembled. Factory set-up available.
Freight
orders require crate charge.
Download the Owners
Manual
(9.2
kb)
|
|
| Return To Tractor Mounted Sprayers |
Return To Ag Page |
|
|
|
|
|
|
| |
| RMLE SERIES
300, 400 & 500 GALLON REAR MOUNT UNITS |
|
|
|
|
- 300, 400 or 500 gallon tank with jet agitation, molded sight gauge and
sump.
- Rear mount brackets are complete with saddles, tank straps and
all necessary bolts.
- Category "2" or "3" rear mount brackets may be used with "Quick
Attach" three point hook-up.
- Large convenient platform with safety rail and ladder for easy
filling of the tank.
- Retractable built-in ground stand for storage when empty.
- A clean water tank is conveniently mounted on the rear mount unit.
- Available with single section electric control for disc spray
kits or three section electric controls for boom spraying.
- All hose and fittings are included for a complete centrifugal
plumbing set-up.
NOTE: Rear mount is unassembled. Factory set-up available.
NOTE: Raven® and
TeeJet® sprayer controllers require wheel sensor
or radar cable.
Download the Owners
Manual
(1.6
mb)
|
|
| Return To Tractor Mounted Sprayers |
Return To Ag Page |
|
|
|
|
|
|
| |
"QUICK TACH" SIDE MOUNT TANK UNIT
for STANDARD TWO-WHEEL DRIVE TRACTORS |
|
|
|
|
- TANKS: Demco's slim-line polyethylene tanks
are available in 200 or 250 gallon size. Tanks feature a dual jet agitator, sump and
molded sight gauge.
NOTE: Exhaust manifold should be shielded from tanks.
- FRAME: Demco "Quick Tach" brackets come with saddles, tank bands,
carrier brackets and all necessary bolts for complete installation.
The undercarriage is bolted to the tractor and can remain on the
tractor while the tanks can be removed quickly and easily. The
heavy duty brackets allow you to carry a total of 300, 400 or
500 gallons.
- PLUMBING: Demco's centrifugal plumbing kits feature single section
or three section electric control panel. Included are 1 1/4" E.P.D.M.
suction hose and 3/4" E.P.D.M. outlet hose to your implement.
- TRANSPORT WIDTH: 14'
NOTE: Do not exceed the tractor manufacturer's frame load capacity
recommendation.
NOTE: Demco's side mount tractor brackets fit most flat side framed
tractors.
Download the Owners
Manual
(4.7
kb)
|
|
| Return To Tractor Mounted Sprayers |
Return To Ag Page |
|
|
|
|
|
|
| |
"QUICK TACH" SIDE MOUNT TANK UNIT
for MECHANICAL FRONT WHEEL DRIVE TRACTORS |
|
|
|
|
- TANKS: Demco's slim-line polyethylene tanks
are available in 200 or 250 gallon size. These tanks feature a dual
jet agitator, sump and molded sight gauge.
- FRAME: Demco Quick Tach brackets come with saddles, tank bands,
carrier brackets and all necessary bolts for complete installation.
The undercarriage is bolted to the tractor and can remain on the
tractor while the tanks can be removed quickly and easily.
- Transport Width 16'.
- PUMP is NOT included.
NOTE: Not applicable on tractors with deep lug front tires or
front duals. Fenders need to be removed on most models.
NOTE: Do not exceed the tractor manufacturer's frame load capacity
recommendation.
Download the Owners
Manual
(1.5
mb)
|
|
| Return To Tractor Mounted Sprayers |
Return To Ag Page |
|
|
|
|
|
|
| |
"QUICK TACH" INLINE TANK UNIT
for MECHANICAL FRONT WHEEL DRIVE TRACTORS |
|
|
Now available for the John Deere 7720, 7820
and the 7920 Model Tractors. Choose between a
400 or 600 gallon tank capacity.
|
|
|
|
|
- INLINE TANKS: The Demco inline tanks are available in two sizes,
either 200 or 300 gallon capacities. They feature dual jet agitation,
sump and molded sight gauge.
The 300 gallon tank has a poly baffle. Linear alignment
and rear placement provide better visibility from the tractor
seat.
- BRACKETS: High Clearance brackets include saddles, tank bands,
carrier brackets and all necessary bolts for a complete installation.
Bracket placement allows 30" of ground clearance.
- PLUMBING: Demco's centrifugal plumbing kits feature single section
or three section electric control panel. Included are 1 1/4" E.P.D.M.
suction hose and 3/4" E.P.D.M. outlet hose to your implement.
- TRANSPORT WIDTH: 16'6".
NOTE: Do not exceed the tractor manufacturer's frame load capacity
recommendation.
NOTE: Not applicable on tractors with front duals.
32" Maximum wheel diameter. 60" front wheel
spacing required when using 300 gallon tanks.
Download the Owners
Manual
(1.2
mb)
|
|
| Return To Tractor Mounted Sprayers |
Return To Ag Page |
|
|
|
|
|
|
| |
SIDE MOUNT TANK UNITS
for AGRICULTURAL TRACK DRIVE TRACTORS |
|
|
|
|
- TANKS: Demco's slim-line polyethylene tanks come in two sizes:
two 250 or 300 gallon tanks. These tanks feature a dual jet agitator,
sump and molded sight gauge.
- FRAME: Demco brackets come with saddles, tank bands, carrier brackets
and all necessary bolts for complete installation.
- PLUMBING: Demco's centrifugal plumbing kits feature single section
or three section electric control panel. Included are 1 1/4" E.P.D.M.
suction hose and 3/4" E.P.D.M. outlet hose to your implement.
- TRANSPORT WIDTH: John Deere - 16'6".
NOTE: Do not exceed the tractor manufacturer's frame load capacity
recommendation.
Download the Owners
Manual
(6.5
kb)
|
|
| Return To Tractor Mounted Sprayers |
Return To Ag Page |
|
|
|
|
|
|
| |
| "QUICK TACH" FRONT MOUNT TANK UNITS |
|
|
|
|
- TANK: 300 gallon tank with jet agitation, molded sight
gauge and sump.
- BRACKETS: Front Mount brackets come with saddle, tank bands, carrier
bracket and all necessary bolts for complete installation. The
tank can be removed quickly and easily while the undercarriage
provides strength in a very critical area for years of trouble
free service.
- PLUMBING: Demco's centrifugal plumbing kits feature single section
or three section electric control panel. Included are 1 1/4" E.P.D.M.
suction hose and 3/4" E.P.D.M. outlet hose to your implement.
- Optional Roll-Away Jack Stand
NOTE: Tank must be empty before removing brackets from tractor.
NOTE: Do not exceed the tractor manufacturer's frame load capacity
recommendation.
Download the Owners
Manual
(4.3
kb)
|
|
| Return To Tractor Mounted Sprayers |
Return To Ag Page |
|
|
|
|
|
|
| |
SIDEQUEST
700 & 1000 GALLON SIDE MOUNT TANKS |
|
|
|
|
Now available for the John Deere
7720, 7820
and the 7920 Model Tractors.
|
|
- High
capacity side mount tank design - Choose
either 700 or 1000 gallon capacity with
16" fillwells. Delivers excellent
front to rear weight distribution ratio.
(25% front: 75%
rear) Extended rear axle
spindle mount allows weight to be shifted
to the rear relieving stress on the
tractor's front axle and chassis. John
Deere has yellow tanks. Fendt, Ford and
Case/IH have white tanks.
- Better
visibility - Tanks are mounted
longitudinal for superb visibility. Choose
either high or low clearance for
visibility and crop clearance.
- Comfortable
Transport Width - 16' 4" when
straddle duals are set on 120"
centers.
- Roll-a-way
jack stands - for easy installation and
removal. (Optional)
- Flanged
fittings - Provide leak free plumbing.
NOTES:
Aftermarket dual hubs
may require different mounting bolts.
Tractor wheel spacing must be set for
30"row spacing.
Unit is not applicable to
some tractors
with front wheel duals.
Download the Owners
Manual
(1.4
mb)
|
|
| Return To Tractor Mounted Sprayers |
Return To Ag Page |
|
|
| |
|
